Reply to thread

Message: <blockquote data-quote="Topper1" data-source="post: 134634" data-attributes="member: 22814">06-2010 models. The starter solenoid contacts burn back just enough to cause the click, click, no turn issue. If the starter / flywheel gears dont mes (tooth on tooth), the solenoid contacts do not make contact. Starter gets no power &  ca not turn.  Add a thin spacer washer to each starter mount bolt. Spacing the starter away from the flywheel allows the starter contacts to contact & power the starter AS the gears are meshing rather then AFTER they have fully meshed.  Old school vehicle starters came with face shims for this very reason  although they were almost never needed.</blockquote>