Reply to thread

Message: <blockquote data-quote="OldAllis" data-source="post: 111663" data-attributes="member: 18888"><p>I've got a CT322 with a break problem. The breaks will not release until you raise and lower the boom a couple times and then it is good for a bit. This works while the machine is cool, as it warms up the breaks will gradually get tighter until they lock up. Once the machine cools off a little you can then get it to move again until it heats back up. The engine temp seemed to be getting a little hotter than normal but not sure because the breaks lock up at this point. The seat and seat belt switches checked out. We replaced the park break solenoid and it didn't help. It seems like there may be too much pressure in the hydrolic system. It is also putting out these codes-F9H9, F9P8, F9P9 not sure what they mean. Deere has been no help. Any suggestion would be greatly appreciated. Thanks</p></blockquote><p></p>