Reply to thread

Message: <blockquote data-quote="brdgbldr" data-source="post: 123695" data-attributes="member: 7474">I'm not familiar with your machine but here are some ideas.Could be your auxiliary valve going bad. Some machines this will cause the auxiliary to shut off due to low pressure.If this problem happens only when you are moving the loader at the same time you are lifting and using the auxiliaries, you could have a hydraulic pressure problem. I've had machines in the past that could not handle two operations at the same time due to warn pumps. The low pressure could be shutting off the auxiliaries.Could be a bad sensor that is shutting down your auxiliary.Could be an intermittent short. Some machines have wiring that run though the lift arms. These wires get bent back and forth, over and over, sometimes causing a short only when the arms are in the up position.Keep in mind that I am not familiar with your machine. These are just some ideas.</blockquote>