Hydra Mac Mitey Mac 8B - Pallet forks and attachment plate.

Help Support SkidSteer Forum:

LeoB

Member
Joined
May 26, 2022
Messages
5
Looking for 30 -36" pallet forks and the attachment plate for a Mitey Mac 8B. I reside in Eastern Iowa and would be willing to travel a reasonable distance to get the plate and forks.
 

LeoB

Member
Joined
May 26, 2022
Messages
5
In regards to the pallet forks, would have any pictures of them? And what city/state are they located?
 

nonnerby

New member
Joined
Jul 30, 2022
Messages
4
Jefferson city mo
 

Attachments

  • 20220730_160532.jpg
    20220730_160532.jpg
    6.5 MB · Views: 10
  • 20220730_160416.jpg
    20220730_160416.jpg
    5.7 MB · Views: 11
  • 20220730_160332.jpg
    20220730_160332.jpg
    6.8 MB · Views: 10
  • 20220730_160324.jpg
    20220730_160324.jpg
    6.4 MB · Views: 11
  • 20220730_160318.jpg
    20220730_160318.jpg
    3.2 MB · Views: 10
  • 20220730_160311.jpg
    20220730_160311.jpg
    5.9 MB · Views: 11

LeoB

Member
Joined
May 26, 2022
Messages
5
I am going to take some measurements on my 8B's bucket at the quick attachment points. I want to confirm that my bucket measurements match your pallet fork backing plate. How long are the forks in the picture? I can't tell by the picture. Thank you for your timely reply. I'll be back to you later today or tomorrow. Leo
 

nonnerby

New member
Joined
Jul 30, 2022
Messages
4
This may help
 

Attachments

  • Center of lower pin to top.jpg
    Center of lower pin to top.jpg
    1.5 MB · Views: 8
  • outside of bracket to outside.jpg
    outside of bracket to outside.jpg
    1.8 MB · Views: 7
  • inside of bracket to inside.jpg
    inside of bracket to inside.jpg
    1.3 MB · Views: 6

LeoB

Member
Joined
May 26, 2022
Messages
5
Thank you for the quick reply. My 8B is at a job site where I am working. I'll be there this afternoon and snag my measurements.
 

LeoB

Member
Joined
May 26, 2022
Messages
5
In regards to the measurements, 2 of the 3 you provided match what I saw on my 8B's bucket. The inside to inside measurement does not match mine. I think I screwed that one up and need to recheck.

Question - In regards to the price you are asking, are you flexible on the asking price?
 
Top