Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Other Brand Skidsteer Forums
Takeuchi Skidsteer Forum
How to raise the cab. TL10
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Skid Kid56" data-source="post: 124849" data-attributes="member: 22860"><p>I see no real answer was put up other than references. </p><p>The TL10 has one large bolt on each side of the cab opening. Sitting in the operator seat the head of the bolts are visible in the front corners of the lower frame of the cab on the left and right. Remove one at a time and hold the cab down when removing the last bolt if the lift cylinders are in good condition. The lift cylinders will make lifting the cab very easy as it may try to rise on it's own once the last bolt is removed. The cab lift lock pin will need to be removed, if it is in place, before un bolting the cab. Facing the engine at the rear of the machine the lock pin should be at the upper left of the rear of the cab. Place pin in holes after raising the cab to lock it in place. Be Safe.</p></blockquote><p></p>
[QUOTE="Skid Kid56, post: 124849, member: 22860"] I see no real answer was put up other than references. The TL10 has one large bolt on each side of the cab opening. Sitting in the operator seat the head of the bolts are visible in the front corners of the lower frame of the cab on the left and right. Remove one at a time and hold the cab down when removing the last bolt if the lift cylinders are in good condition. The lift cylinders will make lifting the cab very easy as it may try to rise on it's own once the last bolt is removed. The cab lift lock pin will need to be removed, if it is in place, before un bolting the cab. Facing the engine at the rear of the machine the lock pin should be at the upper left of the rear of the cab. Place pin in holes after raising the cab to lock it in place. Be Safe. [/QUOTE]
Verification
Post reply
Forums
Other Brand Skidsteer Forums
Takeuchi Skidsteer Forum
How to raise the cab. TL10
Top