Reply to thread

Message: <blockquote data-quote="mllud" data-source="post: 19195" data-attributes="member: 1012">Steve.You can get a vehicle in front of the skid steer and one behind.A chain going from each vehicle to the boom thats locked in the up position. Use one to pull back while the one on the other side gives some slack but is there to take the load when the weight of the cab shifts over center. Then the boom can be supported with something .This method worked for me in a field. I then took a come along and went from the boom to the cab to be sure it was held tight against the boom locks. Mike</blockquote>