Visit our tractor and agricultural equipment communities:

Ingersoll Forum Case IH Forum Combine Forum Hay Forum

JCB Forum John Deere Forum Kubota Forum Mahindra Forum

Massey Ferguson Talk New Holland Forum Valtra Forum Yanmar Forum

Zetor Forum Farming Forum

Reply to thread

Help Support SkidSteer Forum:

Message: <blockquote data-quote="TStaff" data-source="post: 117770" data-attributes="member: 21304">Rick,I just replaced my fuel pickup line on my 751 Pug. It is not easy but you can do it without removing the engine. Most people say to lift the cab and reach over the hydro to get to the tank. I could not fit my arm through there. I suppose you could drop the hydro and reach it much better but I found I could reach it from the rear. Go around the right side of the engine above the battery and the flyweel cover and then bend straight down. Wont be able to see but you can feel it with your finger tips. I used a pair of vise grips to pull the old one out. Tape your new hose to the old and pull it through. Then assemble your pickup line and fuel screen and 90 to the hose. Getting it back in the tank is no fund and uncomfortable but once you get it started you can reach back there with channel locks or something and tap it in. Fuel pick up lines coming off are common on these and yours is probably off. You have to really reach to get it but can be done. For part numbers use <a href="https://www.bobcatpartsonline.com/#/catalogBrowser?path=%2F0000-Loaders%2F0000-751%2F0000-514711001%20%26%20Above,%20514911001%20%26%20Above%2F0006-Electrical%20System%2F0006-Starter%20(2.7%20KW)%20(Nippondenso%20-%20228000-5210)" target="_blank">https://www.bobcatpartsonline.com/#/catalogBrowser?path=/0000-Loaders/0000-751/0000-514711001 & Above, 514911001 & Above/0006-Electrical System/0006-Starter (2.7 KW) (Nippondenso - 228000-5210)</a>. Good diagrams and numbers.</blockquote>

Verification