Reply to thread

Message: <blockquote data-quote="skidsteer.ca" data-source="post: 43193" data-attributes="member: 307">The one in the link would be the earlier version of this heater without the ducts under the seat and it did not draw air from the outside through a filter either. I believe your machine should be equiped as the pictures shows, but finding those parts used may be a challenge.However many of these machines have a door lost or wrecked as they get old and the heater is no longer in use. The problem is the door is easy to remove and sell, the heater not so much, so most people would be less inclined to remove theirs and sell it.I'd get the parts break down from a dealer and see what you need and what a kit would be if you can still get it. The heater in the link I welded 2 pipes on the bottom and installed my own ducts. Also with the factory set up on the 93 the heater only ran the fan on low speed. I found the high speed wire and hooked it up to get more air flow from the fan. Looks like in the F series version they added a multi speed fan switch.Ken</blockquote>