Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Other Brand Skidsteer Forums
Kubota/Wacker Neuson/Hesston/IH/Ford/Other
Died while using, now it won't start
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="foton" data-source="post: 118649" data-attributes="member: 16041"><p>well that is why I wrote if it has one. case are good machines and those are simpler than current models. I believe that those use a mechanical injector pump and it should have a manual primer on the lift pump, loosen the fuel line on the outlet side of the manual pump and pump the pump and see if you are getting flow if so go to the next joint all the way to the inlet of the injector pump, it might be a good idea if you do not know when the fuel filter was changed to do that. empty the old filter into a glass jar and look at it see if there is water or excess dirt in it, so you know if it was plugged up or contaminated with water, that will get you going on isolating the problem. good luck</p></blockquote><p></p>
[QUOTE="foton, post: 118649, member: 16041"] well that is why I wrote if it has one. case are good machines and those are simpler than current models. I believe that those use a mechanical injector pump and it should have a manual primer on the lift pump, loosen the fuel line on the outlet side of the manual pump and pump the pump and see if you are getting flow if so go to the next joint all the way to the inlet of the injector pump, it might be a good idea if you do not know when the fuel filter was changed to do that. empty the old filter into a glass jar and look at it see if there is water or excess dirt in it, so you know if it was plugged up or contaminated with water, that will get you going on isolating the problem. good luck [/QUOTE]
Verification
Post reply
Forums
Other Brand Skidsteer Forums
Kubota/Wacker Neuson/Hesston/IH/Ford/Other
Died while using, now it won't start
Top