Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 112278" data-attributes="member: 82">I have too recently had this issue, my male fitting was leaking and i could see some green seal being squeezed out of the male fitting. I took the seal out and took it to my hydraulic seal shop, saldy it was not something they had so i was pretty well screwed as i damaged it removing it. I can't find any seal kits for them either, mine is the FF series.Sooooooo, with the parts in hand, and the male coupler removed and in pieces, i asked if my seal shop could supply a backup and quad ring to replace the seal, he wasn't sure, but found a quad ring and backup to give the correct thickness and pretty close on the diameter, slightly tight, but it actually seemed to work. Have a chat to your local seal joint and see if they can supply you with a quad and backup ring to do ths job.If your machine came with hiflow, surely they would have made sure the block was right.... Or so i'd have thought.</blockquote>