Reply to thread

Message: <blockquote data-quote="Fishfiles" data-source="post: 7436" data-attributes="member: 782"><p>Order a $330 manuel today for tommorrow and had a chance to talk with 3 different Cat mechanics , they all feel from what I told them it is a resolver or a check valve , both of which are under are on the back side of the controll valve which you get to thru a hole in the side the frame next to the rear tire , Cat isn't going to make it easy , well at least I have a few ideas to work with when I get the manuel and go back , I didn't hook a gauge up as I can see the pressure is there in the back and not in the front , the Cat told me it has to be in the valve if the rear is working fine , the reliefs I took apart and cleaned and replaced o rings and back up rings , but you are right about it could be a weak spring , the thing that steers me away from the reliefs is both tilt and boom are effected and there is no relief for the entire bank , the reliefs are on each spool , hope to get it figured out soon</p></blockquote><p></p>