Reply to thread

Message: <blockquote data-quote="dynacore123" data-source="post: 107175" data-attributes="member: 17549"><p>If you are at all handy it is very easy. I did it in about 14 hours. A few hours each night after work. Used the original ignition, throttle and choke cables. The hardest part was figuring out the wiring, because the Predator comes wired with ignition switch. I removed the ignition switch along with the choke and throttle cables that came with the predator. Of course the wiring diagrams that I could find were in Chinese. I am of course assuming that you have the hand lever to engage the drive. If you have the electric or centrifugal clutch I am not sure. Mine has the hand lever.</p></blockquote><p></p>