Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 6006" data-attributes="member: 82"><p>It could be an adjustment, but i'm not too sure how the linkage is setup on yours. Mine is a fixed length piece of steel bar with holes drilled at either end. If it is simply adjustment, you can loosen the bolts holding the pedal to the chassis and move it that way to get it at the same angle as the other side. If you are referring to the fact that you need to push the pedal a fair way down before it does anything, it does point to a possible control block problem, i just don't know what...</p></blockquote><p></p>