Reply to thread

Message: <blockquote data-quote="bludorbronc" data-source="post: 38599" data-attributes="member: 2047"><p>is it possible to weld a big nut on top of a short piece of pipe and then weld the piece of pipe onto the bucket over the pin and using a bolt in the nut to turn the bolt in and apply force on the pin to help extract. i have done it before , titen the bolt real tite against pin and let sit for awhile or when against it tite hit the head of the bolt with big hammer and titen again, over and over..or maybe a air operated impact driver and let it hammer on the pin awhile.</p></blockquote><p></p>