Reply to thread

Message: <blockquote data-quote="crackerwithcheez" data-source="post: 11008" data-attributes="member: 1278"><p>well i got i wild hair today and removed the valve body and took it completely apart and cleaned very good found a piece of a o ring and put it all back together and the tilt on the bucket went all the way down but still moving just a little bit one thing i did notice is that the spools had a little bit of scaring on the lift and on the tilt could that be my problem!!!! it took me about 10 hrs to do if its not the spools then it has to be the manual relief valve maybe or my main relief valve i am going to try to tighten it up tomorrow and check the manual relief i still got to go get me a pressure gauge and check it and make me a loop hose thanks for all the help and support</p></blockquote><p></p>