Reply to thread

Message: <blockquote data-quote="millertime89" data-source="post: 114507" data-attributes="member: 19854"><p>I am having a couple hydro issues with my T320. First I had lift cylinders leaking and the lift arms would bleed off while running. I rebuilt both Lift cylinders at the same time and the lift arms still bleed down will running. Any suggestions on where to go next? Valve Body? ] Also, I am having issues with the bobtach. I have an issue where the bobtach will open but not close unless I depress the right pedal down with my heel and it will slowly close but barely...6 months ago I had this issue and replaced the bobtach valve block, open and close solenoids, and the issue resolved for a few month but back to the same BS.... Are both these issues pointing to the valve block? Should I pull the whole valve block and rebuild? Thoughts and advise would be much appreciated. Thanks!</p></blockquote><p></p>