Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Bobcat M600 Leaky Rear Axle
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Buckshot7711" data-source="post: 57868" data-attributes="member: 7043"><p>Hey Guys- I have a 1971 Melroe/Bobcat M600 skid steer. I am leaking hydraulic oil from the inside of the machine and it appears to be coming from the rear axle inner housings. I purchased new O-rings and the four holed gaskets from Bobcat. I crawled underneath the machine and removed the caps and the O-rings were pretty bad. The gaskets appear to be leaking as well. I removed the castle nut and washers, but did not want to force the inner axle housing off. Can I remove this housing and replace the gasket without having to remove the side panels/axle shaft/sprocket/etc...? The gasket I am referring to is the gasket which is between the frame of the machine and the axle housing underneath the machine. Please let me know as I will probably have to order more parts such as bearings if I have to tear this whole thing down. I was hoping I could replace the O-ring and gasket without having to do all this as the outer seals and gaskets don't leak. Any info is greatly appreciated- thanks very much - Larry</p></blockquote><p></p>
[QUOTE="Buckshot7711, post: 57868, member: 7043"] Hey Guys- I have a 1971 Melroe/Bobcat M600 skid steer. I am leaking hydraulic oil from the inside of the machine and it appears to be coming from the rear axle inner housings. I purchased new O-rings and the four holed gaskets from Bobcat. I crawled underneath the machine and removed the caps and the O-rings were pretty bad. The gaskets appear to be leaking as well. I removed the castle nut and washers, but did not want to force the inner axle housing off. Can I remove this housing and replace the gasket without having to remove the side panels/axle shaft/sprocket/etc...? The gasket I am referring to is the gasket which is between the frame of the machine and the axle housing underneath the machine. Please let me know as I will probably have to order more parts such as bearings if I have to tear this whole thing down. I was hoping I could replace the O-ring and gasket without having to do all this as the outer seals and gaskets don't leak. Any info is greatly appreciated- thanks very much - Larry [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Bobcat M600 Leaky Rear Axle
Top