Reply to thread

Message: <blockquote data-quote="Zanecr" data-source="post: 136653" data-attributes="member: 25328">1993 bobcat 753 caught on fire years ago and my dads buddy poorly spliced the harness back together. I am finally going to tackle this and get it looking / functioning properly...My main problem is that it cannot be started by just turning the key and going. This White with a black striped wire needs to have 12v before being able to start it. Connect it to a 12v source and it's fine, glow plugs go then I turn the key the rest of the way and it starts.. but I cannot for the life of me figure out where this wire was originally connected, l've been researching for hours and cannot figure it out.. the wiring diagram from bobcat says it goes to a fused switch power on one side then a fuel pump connect on the other, if I'm reading it properly.. I assume it goes to the switch power, but I don't know where that is or what it looks like.. any help is appreciated..[MEDIA=imgur]a/yaJ1ZIQ[/MEDIA]</blockquote>