Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Bobcat 743b
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="craigb93" data-source="post: 105931" data-attributes="member: 4541"><p>Use Jumper Cables to double the ground from the (-) battery post and the engine as a first test. If it starts replace the (-) cable. You may not be able to see corrosion inside the terminal ends. If still no go use the other jumper cable to double the wire from the (+) battery post to the big post on the starter. Then use a small wire to connect the (+) jumper cable momentarily to the small post on the starter. If it starts now replace the (+) Battery Cable. As was said up thread these machines use a small solenoid to engage the starter. If you can hear it click with the key it is probably good. If it is suspect check it with a test light while an assistant turns the key. -Dick</p></blockquote><p></p>
[QUOTE="craigb93, post: 105931, member: 4541"] Use Jumper Cables to double the ground from the (-) battery post and the engine as a first test. If it starts replace the (-) cable. You may not be able to see corrosion inside the terminal ends. If still no go use the other jumper cable to double the wire from the (+) battery post to the big post on the starter. Then use a small wire to connect the (+) jumper cable momentarily to the small post on the starter. If it starts now replace the (+) Battery Cable. As was said up thread these machines use a small solenoid to engage the starter. If you can hear it click with the key it is probably good. If it is suspect check it with a test light while an assistant turns the key. -Dick [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Bobcat 743b
Top