Reply to thread

Message: <blockquote data-quote="Dmc10140" data-source="post: 100349" data-attributes="member: 14225"><p>This is a continuation of my no movement thread. After rebuilding the hydrostatic pump and putting the machine back together I had little to no movement from the wheels. The machine sat for several years. The charge pressure relief valve was inspected during re assembly of the pump. When I removed the charge pressure sensor to install the manual gauge no hydraulic fluid leaked out which I thought was weird. The gauge reads zero at all Rpms. I have replaced the fluid and filter (bobcat brand). What else should I look at? All other hydraulics functions seem to work ( tilt and lift) so I would assume the hydraulic pump is in Good shape. Thanks for the help.</p></blockquote><p></p>