Reply to thread

Message: <blockquote data-quote="peebeeaitch" data-source="post: 71100" data-attributes="member: 8318">21 December 2013Tomorrow, 1 year ago I started trying to get a working Bobcat Skid Steer Loader!?!!??In July I posted of my confusion with the (literally) two black boxes. Here is the result (pic 1 is before crank, pic 2 is after start, pic 3 is after 2 minutes at idle):<img src="http://www.thesouthpole.co.za/bobcat/BloodSweatAndTears/2013-12-21_02.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://www.thesouthpole.co.za/bobcat/BloodSweatAndTears/2013-12-21_03.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://www.thesouthpole.co.za/bobcat/BloodSweatAndTears/2013-12-21_04.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /> I needed to get a gizmo from eBay to attach the heat sink to the DIN rail. Here is the DIN rail with mounted boxes:<img src="http://www.thesouthpole.co.za/bobcat/BloodSweatAndTears/2013-12-29_10.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />As the boxes were originally directly attached to the air duct cowling, I hope that the heat sink and new location won't causing frying problems. I have managed to keep the smoke inside the boxes so far. (The black cable duct runs to the fuel tank.) After about 1 minute the aluminium still felt about ambient so I think I'm ok.</blockquote>