Reply to thread

Message: <blockquote data-quote="Szil66" data-source="post: 103182" data-attributes="member: 16239"><p>I am fairly certain it is leaking from the roto-swivel as is looks like that is where the oil is coming from, the valve doesn't appear to be leaking oil. However, the oil doesn't look like its coming from the line it looks like its from within the roto-swivel and leaks to the sheave and slings the oil from there and covers the belt. I am not entirely sure if it bleeds down or not, it was parked a couple years ago because of the chatter and I only just recently got it running so that I could hear it and try to identify it. Didn't really use it just ran it long enough to address the problems I need to fix. Is there a complete kit for rebuilding the roto-swivel or do I just need to order all the parts individually from Bobcat? The chatter is most noticeable around the driven sheave but was looking for a pin point of where to start looking so thank you for that answer. There are so many bushings and bearings in that small area it's hard to know where to start. The Bobcat is at my place an hour away and can only get up there certain weekends so I am trying to find as much info as I can and get as many parts as I can so I can tackle any repairs at the same time. May just buy the bushings and replace them if it isn't too big of a job.</p></blockquote><p></p>