Reply to thread

Message: <blockquote data-quote="6brnorma" data-source="post: 104510" data-attributes="member: 5914"><p>So…if in fact the race on your axle is 1 7/8" it means that someone at sometime turned it down to accommodate the seal you have now. For repairs I would say your choices are 1) find a 'speedi' sleeve to fit that diameter and use the same size seal. 2) Take a look at "Alchemysa" thread on how he repaired this exact situation 3) find another 610 axle. If you go back to "standard"….I highly recommend you not use SKF, CR or any of those seal….they are of very poor quality compared to the seals in the kits. This is too much work to depend on crappy seals.</p></blockquote><p></p>