Reply to thread

Message: <blockquote data-quote="MikeHall" data-source="post: 100402" data-attributes="member: 15245"><p>I just tried the hydraulics with the aux quick connect disconnected and there was no change. All the valves seem to be centering correctly. I see no leaks anywhere to really speak of. I am thinking about removing and capping off the aux valve as well as the variable speed valves just to eliminate them from the equation. The only thing i have found that i guess could be an problem is the lift valve piston seems to get stuck when pushed too far back. The lift pedal if pressed to far forward allows the linkage to reverse and push that valve piston back to where either it or something else is caught where its difficult to get the pedal back in the normal operating position. I do not see any leaking around that valve and it does seem to work if working slowly means it works. This is the strangest thing I have had happen to some equipment in a very long time. haha</p></blockquote><p></p>