Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Bobcat 313, Kubota diesel ZB600C Engine Glowplugs?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Tazza" data-source="post: 133673" data-attributes="member: 82"><p>I'm leaning towards giving it a snort of ether too. </p><p></p><p>Another thing you can try, is take the glow plugs out, give each cylinder one or two squirts of oil, put them back in and try it again. If it fires up, you likely have worn cylinders or stuck rings. </p><p></p><p>If you can get it running and the issue is rings, if they are stuck from sitting, they may free up</p><p></p><p>I see smoke, it looks white to me, if that is correct, i'd lean towards compression.</p><p></p><p>Have you checked the injectors too? Start with the above first, if that doesn't work, look at your injectors. Pull them out, hook the lines up so you can put your injectors on outside the engine and crank, see if they give a narrow spray or not. If they do, they are fine</p></blockquote><p></p>
[QUOTE="Tazza, post: 133673, member: 82"] I'm leaning towards giving it a snort of ether too. Another thing you can try, is take the glow plugs out, give each cylinder one or two squirts of oil, put them back in and try it again. If it fires up, you likely have worn cylinders or stuck rings. If you can get it running and the issue is rings, if they are stuck from sitting, they may free up I see smoke, it looks white to me, if that is correct, i'd lean towards compression. Have you checked the injectors too? Start with the above first, if that doesn't work, look at your injectors. Pull them out, hook the lines up so you can put your injectors on outside the engine and crank, see if they give a narrow spray or not. If they do, they are fine [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Bobcat 313, Kubota diesel ZB600C Engine Glowplugs?
Top