Reply to thread

Message: <blockquote data-quote="TobinG" data-source="post: 110484" data-attributes="member: 18541"><p>Thank you, I've verified the top of the Bobcat QT is fully seated under the top lip, no gussets or weld dill-berries of other junk to keep the top of the QT from fitting under the lip. I made sure the Bobcat side was clean too. I own a fab shop, water jet, press brakes, all sorts of welding etc. CNC machines etc. I have the means to carefully measure the distance from the top lip to the slot where the wedges engage. I placed a 1" round bar under the top lip and then measured down to the edge of the wedge slot. The round bar compensates for top lips that might be longer or shorter etc. The Paladin Land Sculptor plate was ~3/8 shorter than the shortest plate on any of my other attachments. My guess is the fixture used to weld these is out of spec. I tried to communicate that to Bradco Paladin, but they were not at all interested. <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite3" alt=":(" title="Frown    :(" loading="lazy" data-shortname=":(" /> Tobin</p></blockquote><p></p>