Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Visit our tractor and agricultural equipment communities:
Ingersoll Forum
Case IH Forum
Combine Forum
Hay Forum
JCB Forum
John Deere Forum
Kubota Forum
Mahindra Forum
Massey Ferguson Talk
New Holland Forum
Valtra Forum
Yanmar Forum
Zetor Forum
Farming Forum
Forums
Other Brand Skidsteer Forums
ASV / Terex Skidsteer Forum
ASV RC60 w/ Cat BH30 backhoe
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="ASV603" data-source="post: 88917" data-attributes="member: 12649"><p>I went with the Cat BH30 and of course the upper mounting bracket didn't match up. So I looked at the mounting system on the Terex Posi-tool hoe and tried to copy the brackets the best I could. I ending up making the parts with some simple inexpensive odds and ends from Tractor Supply. I used 1 inch grade 8 bolts which I slide into Cat 3 tractor hitch sleeves which fit in the factory holes on the loader arm perfectly. I then used a 3/8 metal plate on each side connected through the loader arm via 3/4 inch threaded rod. Welded it all together and the brackets are complete. From the hoe, I welded four Cat 2 hitch receivers (two on each side) and slid a Cat 2 hitch pin between them. This allowed the Cat mounting system to be used to connect the hoe to the ASV. So far it is very solid.</p></blockquote><p></p>
[QUOTE="ASV603, post: 88917, member: 12649"] I went with the Cat BH30 and of course the upper mounting bracket didn't match up. So I looked at the mounting system on the Terex Posi-tool hoe and tried to copy the brackets the best I could. I ending up making the parts with some simple inexpensive odds and ends from Tractor Supply. I used 1 inch grade 8 bolts which I slide into Cat 3 tractor hitch sleeves which fit in the factory holes on the loader arm perfectly. I then used a 3/8 metal plate on each side connected through the loader arm via 3/4 inch threaded rod. Welded it all together and the brackets are complete. From the hoe, I welded four Cat 2 hitch receivers (two on each side) and slid a Cat 2 hitch pin between them. This allowed the Cat mounting system to be used to connect the hoe to the ASV. So far it is very solid. [/QUOTE]
Verification
Post reply
Forums
Other Brand Skidsteer Forums
ASV / Terex Skidsteer Forum
ASV RC60 w/ Cat BH30 backhoe
Top
