Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
General Skidsteer & Technical Topics
Shop Talk
anyone built a snow pusher?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="driveitagain" data-source="post: 37864" data-attributes="member: 4480"><p>I built one used an old tractor blade and cut off the 3 point hitch part. Took a 3 inch pipe and welded it to the blade and then slid it inside a 3 1/2 inch which I welded a bracket to an upper and lower plate. Then braced that and welded it to the bobtach. Then mounted an old hydraulic cylinder. I didn't use a flow control but might add one. everything I used except the hydraulic lines and bobcat hydraulic nipples were just old stuff I had around the place.</p></blockquote><p></p>
[QUOTE="driveitagain, post: 37864, member: 4480"] I built one used an old tractor blade and cut off the 3 point hitch part. Took a 3 inch pipe and welded it to the blade and then slid it inside a 3 1/2 inch which I welded a bracket to an upper and lower plate. Then braced that and welded it to the bobtach. Then mounted an old hydraulic cylinder. I didn't use a flow control but might add one. everything I used except the hydraulic lines and bobcat hydraulic nipples were just old stuff I had around the place. [/QUOTE]
Verification
Post reply
Forums
General Skidsteer & Technical Topics
Shop Talk
anyone built a snow pusher?
Top