Reply to thread

Message: <blockquote data-quote="rokcrlr" data-source="post: 101508" data-attributes="member: 15686"><p>I'm new here guys thanks for letting me join. I have hydraulic issues on a 445 about q 1985. I bought it with a bad drive motor. Motor was off when I got the machine so I couldn't try anything out. I rebuilt the motor and it works fine, but my lift and curl won't work. I went thru the valve body and replaced all the o rings and backers and seals. worse now. What it was doing is it would only lift if I hit a certain sweet spot with the peddle, same on dumping the bucket, But it wouldn't go down unless I shut it off and found that same certain sweet spot to let off the pressure. The bucket dumped, but won't curl back, same thing, had to find that certain sweet spot to get it to work. Any ideas what I need to be looking for?</p></blockquote><p></p>