Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Adding auxiliary hydraulics to a 642B
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="GOM" data-source="post: 108970" data-attributes="member: 17510"><p>After a long, busy summer, I'm back to the Bobcat aux. hydraulics project. I've got plenty of room for hydraulic hoses to run the length of the boom (rather than the tubes) and I have the third spool moving freely when the unit is not running, so the valve seems OK. I've got the linkage issue figured out. Basically now I need to know what couplers are used for the old, low flow aux. circuit on one of these machines. Are the couplers the same as the ones on my farm equipment for the remote hydraulics? I can get those at Tractor Supply. Does anyone know how long the hoses should be, off hand? I'll measure, but if some one has done this before, I'll compare notes before buying. I don't have a Bobcat dealer anywhere near here, so I'll have to source everything locally or via the internet. I'm hoping to do this as inexpensively as possible, since this is a limited use feature for my applications.</p></blockquote><p></p>
[QUOTE="GOM, post: 108970, member: 17510"] After a long, busy summer, I'm back to the Bobcat aux. hydraulics project. I've got plenty of room for hydraulic hoses to run the length of the boom (rather than the tubes) and I have the third spool moving freely when the unit is not running, so the valve seems OK. I've got the linkage issue figured out. Basically now I need to know what couplers are used for the old, low flow aux. circuit on one of these machines. Are the couplers the same as the ones on my farm equipment for the remote hydraulics? I can get those at Tractor Supply. Does anyone know how long the hoses should be, off hand? I'll measure, but if some one has done this before, I'll compare notes before buying. I don't have a Bobcat dealer anywhere near here, so I'll have to source everything locally or via the internet. I'm hoping to do this as inexpensively as possible, since this is a limited use feature for my applications. [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Adding auxiliary hydraulics to a 642B
Top