Reply to thread

Message: <blockquote data-quote="Michael_S185" data-source="post: 110954" data-attributes="member: 18677"><p>Hello guys, I have an old Bobcat S185 turbo with an S/N 51… I think 2001. The machine is very good and I use it from time to time to do some work with. I write you from Germany, so sorry for my bad English! The people here don't use bobcats, but I love the machine and repair it always by myself and don't want to change it! I have a problem and will be very happy if you can help me or give me an idea what to do! I don't know why but I got an ACS error 34-02 that should say not connection do the ACS. I opened the wiring schematic and checked as follow: -all power supply wires are ok and I get 12V on them J1 and J3 -all ground wires to the ACS are also ok -the 3x CAN-wires that connect to the Bobcat controller are not broken and I can measure truth them -when I disconnect the actuators, the pedals and handle sensors nothing changes and the error is still there So I think the ACS unit is broken, but I can't get a new one here at the moment very fast… also it is very expensive! So my question is, can I use the standard food control and somehow disable the ACS? How are the actuators controlled from the pedals? In the wiring diagram there is just the ACS unit missing, but I somehow can't understand how the pedals control the hydraulic pump without the ACS… Thank you!!!</p></blockquote><p></p>