Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 8928" data-attributes="member: 82">I hooked it up yesterday to give it a go, its not bad. I still need to adjust the mountings a bit to hook on the chassis for support and swap the fittings as the oil goes in the wrong direction in detent mode. The controls are a touch sticky and one stabilizer leg isn't attached to the ram, it should be an easy fix though. I didn't notice any welds or cracks so i really believe it has done almost no work. The swing is indeed fast! the controls will need a bit of time to get used to but i'm sure that will come in time.The rams are all dry, no leaks can be seen anywhere. The hoses are a bit cracked from weather damage. I can get hoses made at cost so thats easy to fix.It came with a 743 i bought at auction on Monday (technically the 743 came with the hoe). I was told the machine was not working and there is a can of aerostart in the cab!. I do have a spare engine i can throw at it. It looks like it will be another project to do up over x-mas.I need to build another shed! i have no room left to work. I used to have 4 bobcats in my "bob port" but now only 1 fits.</blockquote>