Reply to thread

Message: <blockquote data-quote="laurencen" data-source="post: 133021" data-attributes="member: 14082">here is what I do works every time even my machine the dealer could not get.under the bolt head and flat washer add a lock washer, reinstall the blocks tighten fully and as close to neutral, with machine on blocks start with left block loosen the bolt maybe 1/8 turn, the block has to remain tight to the lever, move lever to get the neutral and note whuch way block moves, with a long punch or bar tap the block enough to move it but only a little now see what changed, if still creaps repeat till wheel stops,move to the right lever and repeat, you may have to redo the left but during this process never tighten or loosen the blocks but tight enough they stay put during the process, takes about half hour however its fool proof, once both axles stop creeping tighten the bolts.I find this process works every time, little bit each tap, for what its worth never had sucess using the service manual way.</blockquote>