Reply to thread

Message: <blockquote data-quote="Mike10" data-source="post: 101809" data-attributes="member: 5461"><p>If you have 12v at the red wire while attempting to crank and no power at the white wire, then there are only two possible problems, one the red wire is not on the batt terminal, also assuming the white wire is on the start terminal, of the switch or the switch is bad, there is no other possible reason for no power at the white wire. Even if there was a dead short on the white wire, it would affect the voltage on the red wire also and should blow the 15a fuse in the engine compartment.</p></blockquote><p></p>