Reply to thread

Message: <blockquote data-quote="rwhitwo" data-source="post: 101710" data-attributes="member: 15719"><p>Mike10- Thanks for the quick response. The key switch is wired just as you described, but when turned key to start now voltage on white wire. Replace key switch with same result. Replace white wire between instrument panel, key switch, and run/service switch with no change. I am so confused. Is there a problem downstream of the key switch on the white wire that would prevent voltage from key switch exit? Could the run/service switch be bad, even though the conductivity passed?</p></blockquote><p></p>