Reply to thread

Message: <blockquote data-quote="adsmith72" data-source="post: 107020" data-attributes="member: 3824"><p>Thanks for the input. I agree it appears it is made that way.. The travel at the valve is where i first noticed it. I was tracking down slop and noticed the excessive travel.. It is quite noticeable when compared to the other valve. This is at the spool.. If someone thinks of it check there machine sometime.. It is a little difficult to do.. You have to have the cab up , machine running with the spool unlocked.. Safety could be a concern. Thanks for the help.</p></blockquote><p></p>