Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
773 G - Wont move
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="OldMachinist" data-source="post: 60439" data-attributes="member: 437"><p>Sounds like the RPM sensor is still the problem. Test the resistance on the sensor it should be 3000-3500 ohms. If that checks out okay then it may need to be adjusted properly. The gap between the end of the sensor and the flywheel needs to be .050". To adjust engine needs to be off, loosen the jam nut, turn the sensor in until it contacts the flywheel, turn the jam nut down until it contacts the flywheel housing, turn the sensor and jam nut together until you can get a .050" feeler gage between the nut and housing. Tighten the jam nut without turning the sensor and reconnect the wiring.</p></blockquote><p></p>
[QUOTE="OldMachinist, post: 60439, member: 437"] Sounds like the RPM sensor is still the problem. Test the resistance on the sensor it should be 3000-3500 ohms. If that checks out okay then it may need to be adjusted properly. The gap between the end of the sensor and the flywheel needs to be .050”. To adjust engine needs to be off, loosen the jam nut, turn the sensor in until it contacts the flywheel, turn the jam nut down until it contacts the flywheel housing, turn the sensor and jam nut together until you can get a .050” feeler gage between the nut and housing. Tighten the jam nut without turning the sensor and reconnect the wiring. [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
773 G - Wont move
Top