Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
763H Aux and lift issue
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Tonka Toy" data-source="post: 114036" data-attributes="member: 15555"><p>Well an update. My machine has two sets of Aux hook ups, one with the usual 2 hook ups and one with 3 hook ups. I stupidly assumed the 4 in 1 should be hooked up to the hook up with just 2 couplers. Traced the lines from the block as Tazza suggested and found they went to the side with 3 hook ups, Swapped the couplers over and can now see the line charging when i push the right hand control one way, but nothing in the other, will try swapping Auix stems over and see if it changes when it stops raining. The tilt and lift functions are still playing up, if i push fully on the lower for the boom it will go down but if i try to push it down slowing it lifts, then push fully down and drops, Tilt off works without issue on, but tilt back and it won't unless you use the Aux toggle switch then it works fine. Have read on here the aux stems are very fragile, will try and source some new ones if the swap later tonight changes what is happening. Thinking either short somewhere or a stuck valve.</p></blockquote><p></p>
[QUOTE="Tonka Toy, post: 114036, member: 15555"] Well an update. My machine has two sets of Aux hook ups, one with the usual 2 hook ups and one with 3 hook ups. I stupidly assumed the 4 in 1 should be hooked up to the hook up with just 2 couplers. Traced the lines from the block as Tazza suggested and found they went to the side with 3 hook ups, Swapped the couplers over and can now see the line charging when i push the right hand control one way, but nothing in the other, will try swapping Auix stems over and see if it changes when it stops raining. The tilt and lift functions are still playing up, if i push fully on the lower for the boom it will go down but if i try to push it down slowing it lifts, then push fully down and drops, Tilt off works without issue on, but tilt back and it won't unless you use the Aux toggle switch then it works fine. Have read on here the aux stems are very fragile, will try and source some new ones if the swap later tonight changes what is happening. Thinking either short somewhere or a stuck valve. [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
763H Aux and lift issue
Top