Reply to thread

Message: <blockquote data-quote="t_jones98" data-source="post: 116605" data-attributes="member: 20639">Ok, so further update.. could someone check my math_______Cyl 1 - 350psi intake clearance .005, exhaust .0105------- cyl 2 - 3125psi intake .006, exhaust .010------- cyl 3 - 200psi intake .006, exhaust .009------ cyl 4 psi 75 intake .006, exhaust .008______ Would those close tolerances, mostly on the exhaust valves, especially for cyls 3-4 cause such a low compression?</blockquote>