Reply to thread

Message: <blockquote data-quote="laurencen" data-source="post: 131219" data-attributes="member: 14082">100% way I know how to set neutral, lift machine and block it so wheels are free, lift cab, at the back at the back right side are the forward/reverse levers, on them are blocks that push the drive valves, remove the 2 bolts in each and add a spring lock washer to them then tighten, back off about 1/2 thread, start machine, center levers and see which way the wheels turn, with someone holding lever to stop wheel turning use a long punch and tap the block tight against the drive valves, let go the lever and if it still turns repeat in small movements until the wheel no longer rotates, now repeat for the other side.this method has worked 100% every time even when the dealer could not get it quite right</blockquote>