Reply to thread

Message: <blockquote data-quote="rjitreeman0909" data-source="post: 103510" data-attributes="member: 15919"><p>The plug is called a welch plug. Insert with dome outward. It will take substantial force to get it to go flat. I recommend setting the flat face of a ball pean hammer on the plug and hit it with another hammer (considered a no no but some times necessary). or even better put the assembly and hammer in a hydraulic press. Dry without sealant is fine. Looking at your old coupling, I would have concern for alignment or condion of other parts in that drive line. Wear patter suggests a long term wobble. What is condition of matng spline?</p></blockquote><p></p>