Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 101982" data-attributes="member: 82">It really needs to come out the front. With the engine out, putting it back in is easier.What i do is pull the engine, disconnect the drive motor lines at the motors, just the two big ones per side, the other hoses to the pumps where they attach at the top, the 4 mounting bolts but remember where the washers go, these are used to set the pump height.A helper is good to get the pump up and out, but you can do it by hand.When you get it out, give it a good clean before cracking it open. If you look up my profile, send me an email if you need a manual on the pump. I can hopefully give ou some more advise in an email too.</blockquote>