Reply to thread

Message: <blockquote data-quote="LazyKG" data-source="post: 101082" data-attributes="member: 12643"><p>Thanks much, spitzair, I believe that I did find the issue. The linkage bar that sits under the hydrostatic unit does appear to have lost its pivot point. However, the Bobcat online parts diagram shows a bolt that passes through the bar from underneath. I can see the hole that this bolt must pass through on the left side of the hydro I cannot see a hole under the bar so I would assume that the bolt sheared off just below the bar. I've got no idea how to get it in there and it's too late to crawl under the thing tonight. I'll have to check that tomorrow.</p></blockquote><p></p>