Reply to thread

Message: <blockquote data-quote="skidboy" data-source="post: 6651" data-attributes="member: 719"><p>If only a 631 was as easy as a 731.The drive motor on a 631 has the drive gear attached,which means that you have to let a front chain go then move the motor rearwards to drop the back chain off,then remove the motor.You then have to remove the tapered drive gear off the motor shaft.The seals in the motor will need to be replaced.It may be better to get a hydraulic guy to do this.A 731 is very simple as the motor bolts to a reduction drive.</p></blockquote><p></p>