Reply to thread

Message: <blockquote data-quote="Crr" data-source="post: 108516" data-attributes="member: 17905"><p>Hey guys , I'm new to the site and look forward to hearing some opinions and thoughts I am looking for a skid steer , updating from old 430 case I recently looked at a 324e 2018 with 2100 hours on it Here is my questions / concerns The pin at the lower end where quick attach is , broken ! The boom arms will slide side to side about 1/2-1 inch ( seems to be the main pins /bushings at the rear on main pivot I realize pins and bushings will have wear but are the arms supposed to be able to move side to side that much ?? Also it has no active codes but I did see it has 18 stored ones in which I don't know what they are and didn't take note either. So I'm not a technical guy , do I worry about the stored codes ? Is the 324e a decent machine ? I like the size and the fact the panels come off ect , ran it and lived the feel of the machine Is there another model comparable I should be looking at Thanks</p></blockquote><p></p>