Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Other Brand Skidsteer Forums
ASV / Terex Skidsteer Forum
2016 Terex R070T intermittent door(?) switch.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Brushwolf" data-source="post: 121067" data-attributes="member: 19233"><p>Found the solenoid and valve. Replaced with new but still nothing changed. The block holding the solenoid and valve are under the front of the fuel tank, so only require seat removal and bolt at top rear center of fuel tank. Block up the front of tank and you can access the block and its solenoids and valves. Unfortunately for me it changed nothing though I put new solenoid and valve in. Did not appear anything was wrong with the removed components either. O rings on valve looked fine, no noticeable contamination anywhere.</p><p></p><p>Now wondering if there is a relay that powers the valve that is failing. Probably should have checked that earlier, but like I said electronics is not my strong suite...</p></blockquote><p></p>
[QUOTE="Brushwolf, post: 121067, member: 19233"] Found the solenoid and valve. Replaced with new but still nothing changed. The block holding the solenoid and valve are under the front of the fuel tank, so only require seat removal and bolt at top rear center of fuel tank. Block up the front of tank and you can access the block and its solenoids and valves. Unfortunately for me it changed nothing though I put new solenoid and valve in. Did not appear anything was wrong with the removed components either. O rings on valve looked fine, no noticeable contamination anywhere. Now wondering if there is a relay that powers the valve that is failing. Probably should have checked that earlier, but like I said electronics is not my strong suite... [/QUOTE]
Verification
Post reply
Forums
Other Brand Skidsteer Forums
ASV / Terex Skidsteer Forum
2016 Terex R070T intermittent door(?) switch.
Top