Visit our tractor and agricultural equipment communities:

Ingersoll Forum Case IH Forum Combine Forum Hay Forum

JCB Forum John Deere Forum Kubota Forum Mahindra Forum

Massey Ferguson Talk New Holland Forum Valtra Forum Yanmar Forum

Zetor Forum Farming Forum

Reply to thread

Help Support SkidSteer Forum:

Message: <blockquote data-quote="Griddler" data-source="post: 112113" data-attributes="member: 19033"><p>Looking for help from the experts. Newbie here. Sorry this is so long. I have an air conditioner that is not working on a 2015 T650. The compressor will not kick on. We jumped the compressor and are able to get the clutch to engage. That's a plus. Next we checked for power to the compressor and that's where we are having issues. No power from the connector on the compressor. Next, thinking it may be low on coolant and not tripping the pressure switch on the drier, my neighbor brought his A/C machine over to test it. Evac'd the system and ran a leak test and it passed. I pulled the pressure switch while the system was drained and could get tone on a meter when I blew air into it. ReInstalled the switch, charged the system and still nothing. Did a voltage check on the connector to the pressure switch and it does not seem to be getting power. The switch in the cab seems to be working enough to make the light come on. Checked voltage on both sides of the switch, good. When doing a continuity check, I get tone on my meter with one side grounded to the frame and the other on what looks to be the hot wire going into the A/C switch in the cab. I get the same result on the connector to the pressure switch. I'm baffled and looking for any help I can get. I do not see any chaffed wires anywhere either. Fuse is good and replaced the relay for S&Gs. What should I check next?</p></blockquote><p></p>

Verification