Reply to thread

Message: <blockquote data-quote="isoscell" data-source="post: 117083" data-attributes="member: 20271"><p>This problem is 100% caused by the controller.  These machines can have 2 types of controller, with four connectors or with two.  I think your machine has a controller with 2 connectors because this problem is often encountered in these. Because these controllers are filled with epoxy, over time, cracks appear that allow moisture to enter the controller, damaging it.  If the controller has 4 connectors, it is good because it can be repaired by ISOSCELL.</p></blockquote><p></p>