Reply to thread

Message: <blockquote data-quote="WVRoger" data-source="post: 142657" data-attributes="member: 22136"><p>I ran a hot wire directly to the solenoid and use it as not only a bypass but as a kill switch to protect the machine from theft. My module has only one light lit on it at the bottom! My first failure was the break Solenoid, and I removed the metal bar initiated by the solenoid. I also had severe leakage at the control valve and was able to rebuild it in place. If you can't work on these older machines you can't afford to own one! My concern is safety of the machine so I am the only one to operate it and do so in WV where the terrain is hillly!</p></blockquote><p></p>