Reply to thread

Message: <blockquote data-quote="Neal" data-source="post: 105134" data-attributes="member: 16982"><p>Hello I am new here I have a 1992 bobcat 753 skid steer I got it for a good price I had tons of hydraulic leaks I replaced almost every hose on the machine and I replace the seals on the gerola motors because they were leaking fluid while I had the motors off I replaced the poppers and hoses I had a hydraulic repair shop look at the motors an they checked them an said they are good now my issue is before I replaced the seals it drove fine forwards an backwards now after I replaced them it barely goes into reverse unless I go forward an the fast into reverse. So put the old poppets back in an shuttle valve with no change . I have searched the forums and see other people have had the same issue so I have tried everything they have done with no success the only thing I think I may have done is maybe put the hydraulic lines on the motors back on backwards I am at a loss o ya all the hydraulics are very strong other than the reverse it feels like there is nothing there please help me I don't have much hair left to pull out...</p></blockquote><p></p>